eagler8 發表于 2020-3-24 16:45
Verbose mode can be enabled via `-v, --verbose` option
PLATFORM: Kendryte K210 1.2.1 > Sipeed MAIXD ...
103#
Processing sipeed-maixduino (platform: kendryte210; framework: arduino; board: sipeed-maixduino)
---------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION:docs.platformio點org/page/boards/kendryte210/sipeed-maixduino.html
PLATFORM: Kendryte K210 1.2.1 #6099b97 > Sipeed MAIXDUINO
HARDWARE: K210 400MHz, 6MB RAM, 16MB Flash
DEBUG: Current (iot-bus-jtag) External (iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, sipeed-rv-debugger, tumpa)
PACKAGES:
- framework-maixduino 0.3.9
- tool-kflash-kendryte210 0.9.1
- tool-openocd-kendryte 1.203.1 (2.3)
- toolchain-kendryte210 8.2.0
LDF: Library Dependency Finder -> bit點ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 14 compatible libraries
Scanning dependencies...
No dependencies
Building in release mode
Checking size .pio\build\sipeed-maixduino\firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [ ] 0.5% (used 32456 bytes from 6291456 bytes)
Flash: [ ] 0.4% (used 68319 bytes from 16777216 bytes)
Configuring upload protocol...
AVAILABLE: iot-bus-jtag, jlink, kflash, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, sipeed-rv-debugger, tumpa
CURRENT: upload_protocol = kflash
Looking for upload port...
Auto-detected: COM11
Uploading .pio\build\sipeed-maixduino\firmware.bin
[INFO] COM Port Selected Manually: COM11
[INFO] Default baudrate is 115200 , later it may be changed to the value you set.
[INFO] Trying to Enter the ISP Mode...
***************
Greeting fail, check serial port ([ERROR] No vaild Kendryte K210 found in Auto Detect, Check Your Connection or Specify One by`-p COM3` )
*** [upload] Error 1
=========================================================== [FAILED] Took 24.30 seconds ===========================================================
Environment Status Duration
-------------------- -------- ------------
sipeed-maix-go FAILED 00:00:21.691
sipeed-maix-one-dock FAILED 00:00:22.965
sipeed-maix-bit FAILED 00:00:23.936
sipeed-maixduino FAILED 00:00:24.296
====================================================== 4 failed, 0 succeeded in 00:01:32.889 ======================================================
終端進程已終止，退出代碼: 1
終端將被任務重用，按任意鍵關閉。
|
樓主: eagler8
