stm8s驅動ht1621液晶程序帶蜂鳴器

ID:94349 · 發表于 2015-11-2 14:57

#include "stm8s.h"
#include "ht1621.h"
unsigned char const smg_number[10]={0xaf,0x06,0xcb,0x4f,0x66,0x6d,0xed,0x07,0xef,0x6f};//0123456789
unsigned char Hour2,Hour1,Min1,Min2,Sec2,Sec1;
unsigned char Hour,Min,Sec,ST_Sec,ST_flag,ST_fig;
unsigned char Half_SecFlag=1,Key_exit_fig,SecFlag;
unsigned char Key_Count,Key_flag,Key_long_flag,Key_fig;
extern unsigned int count2;
extern unsigned char Key_mode;
void Data_process(void)
{
Hour2=Hour/10;
Hour1=Hour%10;
Min2=Min/10;
Min1=Min%10;
Sec2=Sec/10;
Sec1=Sec%10;
}
void Display(void)
{
Ht1621WrOneNum(9,smg_number[Sec2]);Ht1621WrOneNum(12,smg_number[Sec1]);
Ht1621WrOneNum(6,smg_number[Min1]);
if(Half_SecFlag)
{
Ht1621WrOneData(8,0);
}
else
{
Ht1621WrOneData(8,0x04);//col
}
if(Min2==0)
{
Ht1621WrOneNum(4,0);
}
else
{
Ht1621WrOneNum(4,smg_number[Min2]);
}
if(ST_flag)
{
Ht1621WrCmd(LCDOFF);ST_flag=0;GPIO_WriteLow(GPIOB, GPIO_PIN_3);
halt();
}
}
void GPIO_int(void)
{
GPIO_Init(GPIOB, GPIO_PIN_HNIB, GPIO_MODE_OUT_PP_HIGH_FAST);
GPIO_Init(GPIOB, GPIO_PIN_3, GPIO_MODE_OUT_PP_LOW_FAST);
GPIO_Init(GPIOD, GPIO_PIN_4, GPIO_MODE_OUT_PP_HIGH_FAST);
GPIO_Init(GPIOC, GPIO_PIN_LNIB, GPIO_MODE_IN_PU_IT);
EXTI_SetExtIntSensitivity(EXTI_PORT_GPIOC, EXTI_SENSITIVITY_FALL_ONLY);
}
void TIM4_int(void)
{
//TIM4_TimeBaseInit(TIM4_PRESCALER_128, 77);//5ms
TIM4_TimeBaseInit(TIM4_PRESCALER_128, 15);//1ms
TIM4_ClearFlag(TIM4_FLAG_UPDATE);
TIM4_ITConfig(TIM4_IT_UPDATE, ENABLE);
TIM4_Cmd(ENABLE);
}
void TIM1_int(void)
{
TIM1_TimeBaseInit(19, TIM1_COUNTERMODE_UP, 50000, 0);//500ms
TIM1_ITConfig(TIM1_IT_UPDATE, ENABLE);
TIM1_GenerateEvent(TIM1_EVENTSOURCE_UPDATE);
//TIM1_Cmd(ENABLE);
}
void Beep_int(void)
{
BEEP_DeInit();
BEEP_LSICalibrationConfig(128000);
BEEP_Init(BEEP_FREQUENCY_2KHZ);
}
void main(void)
{
/* Infinite loop */
GPIO_int();
Ht1621_Init();
Ht1621_all_on();
GPIO_WriteHigh(GPIOB, BackLight);
Half_SecFlag=1;//ST_fig=1;
TIM4_int();
TIM1_int();
Beep_int();BEEP_Cmd(ENABLE);Ht1621_all_on();
rim();
while (1)
{
if(ST_fig==1)
{
ST_fig=0;
Ht1621_all_off();
BEEP_Cmd(DISABLE);
}
if(Key_flag==1)
{
TIM1_Cmd(ENABLE);
ST_Sec=0;
count2=0;
}
if(Key_flag==2)
{
TIM1_Cmd(DISABLE);
Half_SecFlag=0;//COL
ST_Sec=0;
Key_flag=0;
}
/*if(Key_long_flag==1)
{
//Beep_int();
BEEP_Cmd(ENABLE);Ht1621_all_on();TIM4_int();
TIM1_int();
if(ST_fig==1)
{
ST_fig=0;
Ht1621_all_off();Min=0;Sec=0;
BEEP_Cmd(DISABLE);
}
}*/
Display();Data_process();
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval : None
*/
void assert_failed(u8* file, u32 line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/unsigned int count=0;unsigned char BSec;
extern unsigned char SecFlag,Key_Flag,Key_Flag2,Key_long_flag;
extern unsigned char Hour,Min,Sec,ST_Sec,ST_flag,ST_fig,Key_flag,Key_fig;
unsigned int Key_cnt,Key_mode,Beep_fig;
INTERRUPT_HANDLER(TIM4_UPD_OVF_IRQHandler, 23)
{
TIM4_ClearITPendingBit(TIM4_IT_UPDATE);
if (GPIO_ReadInputPin(GPIOC, GPIO_PIN_1)== RESET)
{
Key_cnt++;
if(Key_cnt==20)//20ms
{
Key_mode++;Beep_fig=50;Key_fig=1;
if(Key_mode==1)
{
ST_flag=0;Key_flag=1;
}
if(Key_mode==2)
{
Key_mode=0;ST_flag=0;
Key_flag=2;
}
}
if(Key_cnt>=3*1000)//4s200*5
{
if(Key_cnt>4000)//800*5
Key_long_flag=1;
Key_flag=0;Key_fig=0;Key_mode=0;//TIM4_Cmd(DISABLE);
BEEP_Cmd(ENABLE);Ht1621_all_on();Min=0;Sec=0;ST_Sec=0;
if(ST_fig==1)
{
ST_fig=0;//TIM4_Cmd(ENABLE);
Ht1621_all_off();Min=0;Sec=0;
BEEP_Cmd(DISABLE);Display();
}
}
}
else
{Key_cnt=0;Key_long_flag=0;}
if(Key_fig)
{
if(Beep_fig)
{
BEEP_Cmd(ENABLE);
Beep_fig--;
}
else //(!Beep_fig)
{
BEEP_Cmd(DISABLE);
Beep_fig=0;
}
}
if(Key_flag==0)
{
count2++;
if(count2==1000)
{
count2=0;ST_Sec++;
if(ST_Sec==2)
{
ST_fig=1;
}
if(ST_Sec==10)
{
ST_Sec=0;ST_flag=1;
}
}
}
}

復制代碼

ID:166284 · 發表于 2020-8-14 15:06

大哥你這個 #include "ht1621.h" 頭文件呢？

ID:839438 · 發表于 2020-11-26 09:47

沒有看到ht1621初始化程序

帳號		自動登錄	找回密碼
密碼			立即注冊

wwwxxx国产_337p日本欧洲亚洲大胆张筱雨_免费在线看成人av_日本黄色不卡视频_国产精品成熟老女人_99视频一区_亚洲精品97久久中文字幕_免费精品视频在线_亚洲色图欧美视频_欧美一区二三区

stm8s驅動ht1621液晶程序 帶蜂鳴器

stm8s驅動ht1621液晶程序帶蜂鳴器