msp430單片機源程序如下:
- #include "bsp.h"
- int main( void )
- {
- float cap,capfirst,capfirst1;
- unsigned int Data_FDC;
- // Stop watchdog timer to prevent time out reset
- WDTCTL = WDTPW + WDTHOLD;
- delay_ms(500);
- bsp_Init();
- _EINT();
- delay_ms(500);
- Data_FDC = ReadRegfdc2214(0x00);//讀取第一通道的值
- cap = 232021045.248/(Data_FDC);
- capfirst = cap*cap;
- delay_ms(500);
- Data_FDC = ReadRegfdc2214(0x02);//讀取第一通道的值
- cap = 232021045.248/(Data_FDC);
- capfirst1 = cap*cap;
- delay_ms(500);
- while(1)
- {
- Data_FDC = ReadRegfdc2214(0x00);//讀取第一通道的值
- cap = 232021045.248/(Data_FDC);
- cap = capfirst -cap*cap;
- printf("DataTEMP0:\n");
- printf("%d\n",cap);
- delay_ms(200);
- Data_FDC = ReadRegfdc2214(0x02);//讀取第一通道的值
- cap = 232021045.248/(Data_FDC);
- cap = capfirst1 -cap*cap;
- printf("DataTEMP1:\n");
- printf("%d\n",cap);
- delay_ms(200);
- }
- }
stm32單片機源程序如下:
- #include "sys.h"
- #include "delay.h"
- #include "usart.h"
- #include "timer.h"
- #include "led.h"
- #include "oled.h"
- #include "fdc2214.h"
- #include "McuDataSend.h"
- void Sys_Init(void);
- float res0,res1,res2,res3;
- float temp0,temp1,temp2,temp3;
- int main(void)
- {
- Sys_Init();
- while(1)
- {
- // Oled_Printf_Float(0,1,res0-temp0,0);
- // Oled_Printf_Float(0,3,res1-temp1,0);
- // Oled_Printf_Float(0,5,res2-temp2,0);
- // Oled_Printf_Float(0,7,res3-temp3,0);
-
- }
- }
- void Sys_Init(void)
- {
- delay_init(); //延時函數初始化
- NVIC_Configuration();//設置NVIC中斷分組2:2；2位搶占優先級，2位響應優先級
- uart_init(115200); //串口初始化為115200
- LED_Init();
- // OLED_Init();
- while(FDC2214_Init());
- led=0;
- delay_ms(100);
- temp0 = Cap_Calculate(0);//讀取初始值
- temp1 = Cap_Calculate(1);
- // temp2 = Cap_Calculate(2);
- // temp3 = Cap_Calculate(3);
- TIM3_Ctrl_Init(10000-1,7200-1);
- }
- //定時器5中斷服務程序
- void TIM3_IRQHandler(void) //TIM5中斷
- {
- if(TIM3->SR&0X0001)//500ms定時中斷
- {
- res0 = Cap_Calculate(0);//采集數據
- res1 = Cap_Calculate(1);
- // res2 = Cap_Calculate(2);
- // res3 = Cap_Calculate(3);
- // Data_Send_Status(res,0,0);
- // printf("%5d : %5d : %5d\r\n",res0,res1,res2);
- led=~led;
- printf("CH0;%3.3f CH1;%3.3f \r\n",res0-temp0,res1-temp1);
- while(USART_GetFlagStatus(USART1,USART_FLAG_TC)==RESET);
- }
- TIM3->SR&=~(1<<0); //中斷標志位清0，等待下一次中斷
- }
所有資料51hei提供下載:
FDC2214_STM32串口顯示.rar
(316.47 KB, 下載次數: 57)
2018-7-18 18:49 上傳
點擊文件名下載附件
FDC2214_MSP430串口顯示.rar
(1.15 MB, 下載次數: 84)
2018-7-18 18:49 上傳
點擊文件名下載附件
|
