wwwxxx国产_337p日本欧洲亚洲大胆张筱雨_免费在线看成人av_日本黄色不卡视频_国产精品成熟老女人_99视频一区_亚洲精品97久久中文字幕_免费精品视频在线_亚洲色图欧美视频_欧美一区二三区

標題: 基于51的ds18b20溫度檢測儀，超過預警溫度會進行聲光報警，并驅動電動機散熱 [打印本頁]

作者: 愛單片機的小強 時間: 2017-6-17 20:30
標題: 基于51的ds18b20溫度檢測儀，超過預警溫度會進行聲光報警，并驅動電動機散熱
#include <reg52.h>
#include <intrins.h>
#define uchar unsigned char
#define uint unsigned int
sbit DS=P2^2;          //define interface
sbit FM=P2^3;
uint temp;          // variable of temperature
uchar flag1;          // sign of the result positive or negative

#define ON 0;
#define OFF 1;

uint ad=280;
sbit DJ=P2^5;

sbit dula=P2^6;
sbit wela=P2^7;
unsigned char code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,
                     0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};
unsigned char code table1[]={0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,
                     0x87,0xff,0xef};

void delay(uint count)    //delay
{
  uint i;
  while(count)
  {
i=200;
while(i>0)
i--;
count--;
  }
}
void dsreset(void)    //send reset and initialization command
{
  uint i;
  DS=0;
  i=103;
  while(i>0)i--;
  DS=1;
  i=4;
  while(i>0)i--;
}

bit tmpreadbit(void)    //read a bit
{
uint i;
bit dat;
DS=0;i++;       //i++ for delay
DS=1;i++;i++;
dat=DS;
i=8;while(i>0)i--;
return (dat);
}

uchar tmpread(void) //read a byte date
{
  uchar i,j,dat;
  dat=0;
  for(i=1;i<=8;i++)
  {
j=tmpreadbit();
dat=(j<<7)|(dat>>1); //讀出的數據最低位在最前面，這樣剛好一個字節在DAT里
  }
  return(dat);
}

void tmpwritebyte(uchar dat) //write a byte to ds18b20
{
  uint i;
  uchar j;
  bit testb;
  for(j=1;j<=8;j++)
  {
testb=dat&0x01;
dat=dat>>1;
if(testb)    //write 1
{
   DS=0;
   i++;i++;
   DS=1;
   i=8;while(i>0)i--;
}
else
{
   DS=0;    //write 0
   i=8;while(i>0)i--;
   DS=1;
   i++;i++;
}

  }
}

void tmpchange(void)  //DS18B20 begin change
{
  dsreset();
  delay(1);
  tmpwritebyte(0xcc);  // address all drivers on bus
  tmpwritebyte(0x44);  //  initiates a single temperature conversion
}

uint tmp()             //get the temperature
{
  float tt;
  uchar a,b;
  dsreset();
  delay(1);
  tmpwritebyte(0xcc);
  tmpwritebyte(0xbe);
  a=tmpread();
  b=tmpread();
  temp=b;
  temp<<=8;          //two byte  compose a int variable
  temp=temp|a;
  tt=temp*0.0625;
  temp=tt*10+0.5;
  return temp;
}

void display(uint temp) //顯示程序
{
uchar A1,A2,A2t,A3;
A1=temp/100;
A2t=temp%100;
A2=A2t/10;
A3=A2t%10;
dula=0;
P0=table[A1]; //顯示百位
dula=1;
dula=0;

wela=0;
P0=0xfe;
wela=1;
wela=0;
delay(1);

dula=0;
P0=table1[A2]; //顯示十位
dula=1;
dula=0;

wela=0;
P0=0xfd;
wela=1;
wela=0;
delay(1);

dula=0;
P0=table[A3]; //顯示個位
dula=1;
dula=0;

wela=0;
P0=0xfb;
wela=1;
wela=0;
delay(1);
}

void main()
{
uchar a;
uint t,i=0x7f;//i用于LED燈顯示
  DJ=1;
while(1)
{
DJ=1;
tmpchange();
t=tmp();
display(tmp());
P1=0XFF;

if(t>ad)
{
DJ=0;
FM=0;
display(tmp());
i=_crol_(i,1);
P1=i;
display(tmp());
delay(3);
display(tmp());
}
else{FM=1;P1=0XFF;DJ=1;}

}

作者: nihao12345678 時間: 2020-3-18 20:28
沒有原理圖嗎？

作者: 1241350141 時間: 2020-4-7 10:11
請問有沒有仿真圖 proteus

歡迎光臨 (http://m.izizhuan.cn/bbs/)